Taso Floor Polish

A Non slip, High gloss and long lasting polymer.

It’s a translucent milky liquid polish emulsion which dries to an extremely hard wearing, long lasting shine on tiles, terrazzo, marble & quarry tiled floor.

Non flammable

Coverage

1 liter covers approximately 3m² in a single coat.

Caution:

• Do not freeze.
• Do not return unused polish to the container.
• In the event of prolonged  contact with skin or splashes into the eyes or clothing, wash thoroughly with clean water.
• If irritation persists, seek medical help.
• Store at room temperature in a cool dry place.

Directions for use:

1. Ensure that the floor is correctly prepared.(no loose dust or dirt, properly striped or maintained)
2. Apply an even coat of undiluted Taso floor polish to the clean, dry floor using a suitable polish applicator or a mop.
3. Allow to dry( 30 minutes)
4. Apply a second and third coats in opposite directions.
5. allow 24 hours to fully dry.

Maintenance:

1. Sweep or vacuum.
2. Damp mop with Taso floor maintainer. at a rate of 1:30
3. Spray buff only with Taso polish diluted at the rate of 1:10
4. Strip the polish with Taso stripper.

Ingredients: Acrylic styrene polymer emulsion.